Custom Search

Cost to Install Travertine Flooring


Below our travertine stone installation cost for 2014 calculator allows you to change variables & figure.


Travertine Floor Install Cost Options:
 

Basic Stone Tile Pattern 1
 
Diagonal Straight
Floor Square Footage 2   Sq. Ft.

  Low Mid High
     
Labor to Install Travertine Floor Tiles  
$309.67
$372.78
$435.90
     
Travertine Floor Tile Materials  
$277.20
$403.05
$528.90
   
Total Cost
$586.87
$775.84
$964.80
     
Average Square Foot Cost  
$8.38
$11.08
$13.78
       


























Includes all labor, materials and supplies needed for laying the stone based on entered square footage. Results are approximations based on installs for travertine floor tile in the United States. Total cost sums exclude any taxes charged for both materials and labor amounts.

Options for Installing Travertine Flooring:

1 The diagonal is laid at 45 degrees while straight is parallel with the walls. Note that large travertine is often set on the angle on the floor.
2 This is the length times width (inches) divided by 144.

Inclusions and Exclusions

Included is the install of the travertine to be set overtop a concrete slab, in either a straight or diagonal pattern on the horizontal floor surface. This exludes any removal of the existing floor. A simple decorative travertine border may be part of the completed floor. Custom borders or inlays are excluded.

Labor, Materials and Supplies notes:

  • The labor component charged to the project only.
  • Includes all labor necessary for the completion of project from prepping the floor, cleaning the concrete, and removal and replacement of any baseboard moulding, making the proposed layout of the pattern and then setting travertine tile in a centered fashion among the room. Includes supplying & applying adhesives like thinset mortar mix and mortar base such as if required by larger tiles; applying back buttering techniques where called for.
  • Tools and supplies accounted for include occasional replacement diamond blades for wet tile saw, and manual tile cutters and nippers. Includes the placement of spacers that are normally 1/8" to 1/2" although many tile setters do not opt for these.
  • Taking measures at protecting existing flooring, and final cleanup and disposal of waste is allocated within these amounts.
  • Grade of supplies and materials are intercompatible and rated at moderate and above.

  • Amounts for the labor portion per specific geographic locales may fluctuate based on given zip code.




    Friday, Aug 22, 2014
    Findat:


    Share this page:






    Referwork.com Flooring Installations


    © 2000, 2001 - 2014 Referwork. All rights reserved.